Διόρθωση reset σε Dreamcast.

pooky(1)

MultiDimensional RetroDivinitY
Joined
14 Ιουν 2006
Μηνύματα
9.122
Αντιδράσεις
205
Πολλές φορές όταν παίζουμε κάποιο παιχνίδι, η κονσόλα μας μας χαιρετάει με ένα ξεγυρισμένο reset. Ο τρόπος για να το λύσουμε είναι εξαιρετικά απλός και μπορείτε να το διαβάσετε στα παρακάτω:

So you're playing away at some game, and all of a sudden your dreamcast resets and returns you to the main DC menu screen, you choose to ignore it the first time, but after a few days the problem gets worse, and eventually your DC becomes unplayable.
Why is it doing this???

In nearly all cases the reset problem is caused by two things, heat expansion of circuit boards inside the DC and poor electrical connections.

This is what happens inside your dreamcast and how it causes your DC to reset.

As you know the dreamcast takes the main supply voltage straight into the back of the system, and this voltage (240v Europe, 110v America) needs to be stepped down and converted to a stable DC current that the electronic components can handle. As the electricity enters your dreamcast it passes through a step-down transformer which reduces the voltage, unfortunately step-down transformers generate heat and as things warm up they expand, the step-down transformer in the dreamcast is located on a separate circuit board, the main power board, which is on the left hand side in the dreamcast above the main mother board and to the left of the GD rom assembly, this is why the left side of the dreamcast gets warmer. The main power board is connected to the dreamcast mother board by six aluminium pins, as the power board heats up it expands slightly putting pressure on the pins and over time this will bend them slightly, resulting in a poor electrical connection that will cause your dreamcast to reset at random.

This is what you do to fix the problem.

You will need the following :

a screwdriver with a + blade

some common sense

and make sure that your dreamcast is out of warranty as the following will void it.

1) Disconnect from the power outlet, remove all cables from the dreamcast and any game disc that's inside

2) Remove the modem

3) Undo the four screws in the base of the dreamcast and KEEP SAFE

4) Remove the lid. On the left hand side you will see: the Main power board, with the GD rom assembly to the right, the input port circuit board at the base, and in the bottom left hand side you will see the power on/off switch, this switch is connected to the power board with a grey cable, at the power board end of the cable there is a white conector, grip the conecter at the base and lift clear.

5) Undo the two brass screws that hold the power board down and KEEP SAFE

6) Towards the base of the power board you will see a white connector, it has six pins sticking out, gently lift the power board out of the dreamcast and off the pins.

7) Under the power board there is a clear plastic insulation sheet DO NOT REMOVE THIS, IF YOU DO PUT IT BACK.

8 ) Look at the pins and clean any dirt off them. DON'T USE ANY LIQUID to clean them with

9) GENTLY apply SMALL amount of pressure to pins pushing them towards the back of the dreamcast, DO NOT BEND THEM, JUST APPLY A SMALL AMOUNT OF PRESSURE

10) Re-assemble your dreamcast and the resets should be gone.

The above is a step by step guide to what I did to fix my reset problem. DO NOT POWER UP YOUR DREAMCAST WITH OUTTHE LID ON, OR YOU RISK A POTENTIALLY FATAL (and if not very painful) ELECTRICAL SHOCK.
Τα εύσημα για τις παραπάνω συμβουλές στο forum του Gamespot.

Επιπρόσθετα tips:

Το πρόβλημα φαίνεται να "χτυπάει" περισσότερο τις κονσόλες που έχουν "γράψει" έναν αρκετά σεβαστό αριθμό ωρών λειτουργίας. Τα πάντα οφείλονται τελικά στο ανεμιστηράκι της κονσόλας μας όπου μαζεύει ΤΗΝ μπίχλα μετά από κάποιες εκατοντάδες ώρες λειτουργίας. Το αποτέλεσμα είναι να μην απάγεται σωστά η θερμότητα και η πλακέτα του τροφοδοτικού να διαστέλεται ώστε να μην έχουμε σωστή επαφή της με τις απολήξεις τροφοδοσίας της κεντρικής πλακέτας.

Οπότε πρέπει πάντοτε να κρατάμε την κονσόλα μας καθαρή χρησιμοποιώντας ένα σπρέυ πεπιεσμένου αέρα, αν δεν θέλουμε ή δεν μπορούμε να την ανοίξουμε. Πάντως η χρήση σπρέυ δεν αποτελεί την απόλυτη λύση μια και μπορεί μεν να βγάλει την σκόνη από τον ανεμιστήρα, αλλά μπορεί κάλλιστα να την σπρώξει σε σημεία καίριας σημασίας μέσα στην κονσόλα μας. Τελικά η λύση του εκτενούς λυσίματος και καθαρισμού του καθενός κομματιού ξεχωριστά είναι επιβεβλημένη. Αν δεν ξέρετε ή δεν πιάνουν τα χέρια σας μπορείτε να ζητήσετε βοήθεια από κάποιον περισσότερο έμπειρο.
 
Τελευταία επεξεργασία από έναν συντονιστή:
Έχω το ίδιο θέμα. Ακολούθησα το συγκεκριμένο tutorail και so far so good. Για ότι νεότερο θα ενημερώσω!
 
Πίσω
Μπλουζα