Ten times faster than the old USB spec, USB 3.0 can transfer a 27GB file in just 70 seconds.
USB 3.0 will be backwards-compatible with USB 2.0
Like the upgrade from USB 1.1 to 2.0, the new 3.0 connectors and cables will be physically and functionally compatible with hardware from the older specs. Of course, you won’t be able to maximize your bandwidth unless you’re using a USB 3.0 cable with Superspeed devices and ports, but at least plugging a 3.0 cable into a 2.0 port won’t blow up your PC. The spec’s compatibility lies in the design of the new connectors. USB 2.0 cables worked off of four lines – a pair for in/out data transfer, one line for power, and the last for grounding. USB 3.0 adds five new lines (the cable is noticeably thicker), but the new contacts sit parallel to the old ones on a different plane, as opposed to being adjacent to them. This means you’ll be able to differentiate between 2.0 and 3.0 cables just by looking at the ends.
At first glance, the USB 3.0 connector looks just like the 2.0 design
The maximum speed of USB 3.0 is 4.8Gbps
It’s true: USB 3.0 SuperSpeed will be 10 times faster than the 480Mbps limit of the 2.0 spec. The example Intel likes to give out when talking about the new speed is that transferring a 27GB HD movie to your future media player will only take 70 seconds with USB 3.0, while it would take 15 minutes or more with 2.0. Keep in mind that you’re only going to be able to take advantage of this speed if your portable storage device can write data that quickly. Solid state devices will benefit most from the speed boost, while magnetic hard disks will be limited by their RPM and corresponding read/write speeds. Also, new Mass Storage Device drivers will have to be developed for Windows to take advantage of the spec.
The USB 3.0 A and B-side connectors
Uploads and downloads are kept on separate data lanes
Remember those five new lanes we mentioned earlier? With USB 3.0, two new lanes will be dedicated to transmit data, while another pair will handle receiving data. This not only accounts for the significant speed boost, but also allows USB 3.0 to both read and write at the same time from your portable storage device. In the old spec, the pair of lanes used for data transfer weren’t split between send and receive – they only could handle traffic in one direction. Bi-directional data transfer will be very useful for syncing up information on PDAs and storage backup.
The packed guts of a USB 3.0 cable -- note that the cable will be about as thick as a ethernet cable
USB 3.0 will charge more devices, quicker
Not only will USB 3.0 cables facilitate faster transfer speeds, but they’ll carry more power, too. The USB-IF recognizes the growing number of portable devices that charge via USB (cellphones, MP3 players, digital cameras), and have bumped the power output from about 100miliamps to 900 milliamps. That means not only will you be able to power more than 4 devices from a single hub, but the increase current will let you charge up heftier hardware as well.
USB 3.0 will be more power efficient
One of the mandates of the new spec is more efficient power-usage protocols. USB 3.0 abandons device polling in favor of a new interrupt-driven protocol, which means non-active or idle devices (which aren’t being charged by the USB port) won’t have their power drained by the host controller as it looks for active data traffic. Instead, the devices will send the host a signal to begin data transfer. This feature will also be backward compatible with USB 2.0 certified devices.
A look at the mini connector that'll connect to cell-phones and other portable devices
The spec that Intel released mid-last week is only 90% complete. Ravencraft says that they expect the spec to be finalized by Q4 of this year. Hardware partners are expected to have USB 3.0 controllers designed by mid 2009, and consumers won't see the first end products utilizing the spec until early 2010 (though a late Holiday 2009 push for new products isn't out of the question).
